This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - AL
16
« on: April 11, 2017, 06:01:08 PM »
If you are wondering where the RT comes from, It is something I picked up from blog on Todd Larson's blog site that was posted by Dick Braun. I cannot find "RT" in any Johnson Literature. It was basically to indicate which side of the reel the word DEMO was located.
17
« on: April 11, 2017, 05:58:20 PM »
If you are wondering where the RT comes from, It is something I picked up from blog on Todd Larson's blog site that was posted by Dick Braun. I cannot find "LT" in any Johnson Literature. It was basically to indicate which side of the reel the word DEMO was located.
18
« on: April 01, 2017, 08:34:49 PM »
Just to dispel some theories that there is a major difference, Here is what is written: The first commercial spincast reels were introduced by the Denison-Johnson Reel Company and the Zero Hour Bomb Company (ZEBCO) in 1949.[19][20] The spincast reel is an attempt to solve the problem of backlash found in baitcast designs, while reducing line twist and snare complaints sometimes encountered with traditional spinning reel designs. Just as with the spinning reel, the line is thrown from a fixed spool and can therefore be used with relatively light lures and baits. However, the spincast reel eliminates the large wire bail and line roller of the spinning reel in favor of one or two simple pickup pins and a metal cup to wind the line on the spool. Traditionally mounted above the rod, the spincast reel is also fitted with an external nose cone that encloses and protects the fixed spool.
With a fixed spool, spincast reels can cast lighter lures than bait cast reels, although friction of the nose cone guide and spool cup against the uncoiling line reduces casting distance compared to spinning reels. Spincast reel design requires the use of narrow spools with less line capacity than either baitcasting or spinning reels of equivalent size, and cannot be made significantly larger in diameter without making the reel too tall and unwieldy. These limitations severely restrict the use of spin cast reels in situations such as fishing at depth, when casting long distances, or where fish can be expected to make long runs. Like other types of reels, spin cast reels are frequently fitted with both anti-reverse mechanisms and friction drags, and some also have level-wind (oscillating spool) mechanisms. Most spin cast reels operate best with limp monofilament lines, though at least one spin cast reel manufacturer installs a thermally fused "superline" into one of its models as standard equipment. During the 1950s and into the mid-1960s, they were widely used and very popular, though the spinning reel has since eclipsed them in popularity in North America. They remain a favorite fishing tool for beginners.
n
SpinCast Reel Operation
Pressing a button on the rear of the reel disengages the line pickup, and the button is then released during the forward cast to allow the line to fly off the spool. The button is pressed again to stop the lure at the position desired. Upon cranking the handle, the pickup pin immediately re-engages the line and spools it onto the reel.
This would absolutely include the Dennison Johnson Sidewinder Series came out in 1949. The Humphrey’s closed face “sidewinder†also falls into this topic as it has to have a small tad pushed to cast.
Note: Humphrey’s did not call their reel a sidewinder. I am using that term because of similar operation as the Johnson Sidewinders.
My point:. A closed face reel and a spin caster by definition are one and the same.
19
« on: March 18, 2017, 10:09:21 AM »
Looking for a Good + or better Johnson Sidewinder 60with box and paper a plus
20
« on: March 01, 2017, 10:17:23 PM »
In 1958, Minnesota was celebrating it's centennial year. Johnson considered it appropriate to Salute their home state with a "NEW" Reel. The result was the Centennial 120
Thanks to Dennis for sharing this info from his Sports Afield July 1958 Catalog
21
« on: March 01, 2017, 07:29:46 PM »
Many of us are aware of the "trade reels" Johnson built for retailers like Montgomery Ward (Hawthorne), Cooks Premier and Ace Hardware. These reels were based on the Johnson Century 100 and Sabra 130 models, and differed from them only in colors and markings. Click the link below to Skips Blog and read about a couple them. http://www.fishingtalks.us/blog-post/johnson-chevron-13535/
22
« on: February 28, 2017, 12:32:51 PM »
Janney, Semple, Hill and Company was founded in 1866 by Thomas B. Janney, his brother Edwin, and his brother-in-law, Samuel T. Moles. The first store, located on Washington Avenue between Nicollet and Minnetonka streets, was named Janney and Moles. In April 1875, a co-partnership was formed consisting of Thomas B. Janney, Samuel T. Moles, Frederick W. Brooks, and George H. Eastman. The company name was then changed to Janney, Moles, Brooks and Company.
In 1887 Samuel T. Moles withdrew from the Company, and the name was changed to Janney, Brooks, and Eastman.
In 1883 George H. Eastman's interests were purchased by Frederick Brooks and Thomas Janney. In Hovember of 1883, Brooks died and his interests were sold to Frank B. Semple. The firm name then became Janney, Semple and Company.
On January 22, 1891 the firm was incorporated. Thomas B. Janney was named president and treasurer, Frank B. Semple, vice president, and Horace M. Hill, secretary, the latter given the office because of long service to the company.
After 1886, the company expanded rapidly, due in part to the expansion of the Great Northern and Northern Pacific railroads into the western territories. The company moved its headquarters in Minneapolis many times as increased business made larger quarters necessary.
Janney Semple, Hill and Company placed the first big order for Johnson Reels in 1950.
From the guide to the Corporate records., 1866-1956., (Minnesota Historical Society)
Note:
Many think that Janney was spelled as Jainey and also thought to be a woman
23
« on: February 24, 2017, 09:53:26 PM »
Whether you are fishing in freshwater or salt, the Johnson brand has become a staple for every angler. Johnson spinner baits, spoons, reels and more have stood the test of time since 1949 and continue to deliver quality products today.
We got our start in 1949 when Lloyd Johnson and Henry Warren Denison built their first reel, the Johnson Sidewinder, in a basement in Mankato, Minnesota. Denison-Johnson, Inc., was formed shortly after and a patent for the Sidewinder was granted in July of 1953. 1955 Johnson Century…
In the early 60’s Johnson acquired the original Beetle Spin®, a lure that is still in production today and can be found in virtually every tackle box. There have been many imitations on the market over the years, but none have ever matched the action and simplicity of Johnson’s original Beetle Spin.
During the late 1960’s and early 1970’s, Johnson Wax Associates (known today as S.C. Johnson & Son, Inc., a component of Johnson Family Enterprises) acquired Denison-Johnson, Inc. It became a profitable, self-sustaining outdoor equipment business known as Johnson Camping, Inc., and in 1985 was renamed Johnson Worldwide Associates (JWA).
By the end of the 1980’s, the company was making Johnson brand fishing reels, Minn Kota trolling motors, Old Town canoes, Eureka! tents and Camp Trail backpacking gear.
In 2000 Pure Fishing acquired the Johnson Fishing Tackle Division from JWA. Today the Johnson brand includes fishing lures, reels and combos.
24
« on: February 19, 2017, 07:10:54 PM »
25
« on: February 11, 2017, 06:39:45 PM »
New model added to this board. little is known so far. Skip is putting a blog together and will post when done. Feel free to post anything you have to offer
26
« on: January 22, 2017, 04:11:01 PM »
Many of us are aware of the “trade reels†Johnson built for retailers like Montgomery Ward (Hawthorne), Cooks Premier and Ace Hardware. These reels were based on the Johnson Century 100 and Sabra 130 models, and differed from them only in colors and markings. In one brief instance, Johnson offered a trade reel unlike any of the others and never shown in factory catalogs.  Behold, the Johnson Chevron 135/35. These reels were made in Hong Kong, the 135 being the first version, 35 came later. According to a conversation on another site, they were produced 1979-82 and sold through 12 different stores, from “mom & pop†to J.C. Penney stores. Price was $4.99  These are about as basic as you can get. The body, foot and spool are one piece of plastic. There’s a star drag on the crankshaft with two of the smallest drag discs I’ve ever seen. Anti-reverse is full-time. The 135 and the 35 differed in two ways. The 135 front cover has a pebbled, satin finish on it and the spinner head doesn’t have a spring, at least not on the reel at hand  The front cover on the 35 has a flat finish and there’s a coil spring on the pick-up pin. These reels are an uncommon curiosity, might be okay for going after panfish.   PUBLISHED BY skipper I'm 69 y.o., retired 7 years from the wholesale liquor distribution business. My interests include vintage Johnson spin cast fishing reels, Oldsmobiles and Freemasonry. View all posts by skipper
27
« on: June 03, 2016, 08:31:00 PM »
28
« on: June 02, 2016, 08:10:18 AM »
29
« on: May 29, 2016, 11:11:57 AM »
1955 was the year of introduction of the Johnson 100 and it was discontinued by 1979. After a hiatus of several years. A 40th year Anniversary Model was provided for 1995.
|
Show Posts
