Johnson Reel Collectors Assn. (J.R.C.A.) since 10/10/14

Johnson Guide Models => Model 165 (1978-1979 => Topic started by: gcdunlap on February 10, 2018, 11:56:14 AM

Title: Guide
Post by: gcdunlap on February 10, 2018, 11:56:14 AM

Hi:

I have a Johnson Guide 165 (Black Reel) I need parts for. Just checking to see if anyone has anything out there.

Thanks

Title: Re: Guide
Post by: Skip Smith on February 10, 2018, 12:20:25 PM

I have a spare or two.  What part(s) do you need?
Skip

Title: Re: Guide
Post by: gcdunlap on February 10, 2018, 05:46:48 PM

Hi Skip:

I am looking for the steel washer and shim (copper washer) that sit between the brass gear immediately and lower spool housing. 

Thanks!

Title: Re: Guide
Post by: Huckster37 on February 10, 2018, 07:55:03 PM

If you at the schematic and tell me the part names and part numbers I should be able to help you out.
http://www.johnsonreels-online.org/index.php/board,373.0.html (http://www.johnsonreels-online.org/index.php/board,373.0.html)

Title: Re: Guide
Post by: gcdunlap on February 11, 2018, 03:04:11 PM

After looking at the drawing, it looks like the 1043-3 (Drag Holder) and the 1041s (Drag Washers - Internal Teflon).

Thanks,
Gene

Title: Re: Guide
Post by: Huckster37 on February 12, 2018, 06:04:00 AM

I'm no at home right now, so I won't be able to check until this weekend. I know I have the teflon washer, and I think I have the drag holder, I'll let you know this weekend.
Dennis

Title: Re: Guide
Post by: gcdunlap on February 12, 2018, 09:55:30 AM

OK - thanks!

Title: Re: Guide
Post by: Skip Smith on February 12, 2018, 02:24:08 PM

I dorked up....my Guides are 155's.  Can't help.

Title: Re: Guide
Post by: gcdunlap on February 13, 2018, 05:00:53 PM

I have a 155 too... but it's functional! Thanks for looking!

Title: Re: Guide
Post by: Skip Smith on February 13, 2018, 08:53:33 PM

You're welcome, my friend!  Got three 155's...one all black, two red/black.  Lemme know if you need help with your 155's and good luck with your 165!

Skip

Title: Re: Guide
Post by: Huckster37 on February 24, 2018, 08:51:21 AM

Sorry for the delay DC, had to dig this stuff out and I got side tracked in the process. Here are pics of the parts and an internal drag diagram that I made to help me get it back together again. I have both of these parts new and used. Let me know if this is what you need.
The last picture is an internal drag assembly together.

Title: Re: Guide
Post by: Skip Smith on February 25, 2018, 08:37:27 PM

Great breakdown of the internal drag, Dennis!

Title: Re: Guide
Post by: gcdunlap on March 02, 2018, 04:13:27 AM

Hi:

I will need the 1043-3 (Drag Holder) and the 1041s (Drag Washers - Internal Teflon). My preference would be for new parts, but could make do with used ones in good condition.

Thanks!

Title: Re: Guide
Post by: Huckster37 on March 03, 2018, 06:31:44 PM

I just need your mailing address to make it happen. I tried to send you an email, do you receive it?

Title: Re: Guide
Post by: gcdunlap on March 10, 2018, 04:04:46 AM

HI:

I just saw your message and replied - thanks!

Gene