Author Topic: Guide  (Read 1747 times)

gcdunlap

  • Guest
Guide
« on: February 10, 2018, 11:56:14 AM »
Hi:

I have a Johnson Guide 165 (Black Reel) I need parts for. Just checking to see if anyone has anything out there.

Thanks

Skip Smith

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 818
  • Country: us
  • Karma: +6/-1
    • View Profile
Re: Guide
« Reply #1 on: February 10, 2018, 12:20:25 PM »
I have a spare or two.  What part(s) do you need?
Skip

gcdunlap

  • Guest
Re: Guide
« Reply #2 on: February 10, 2018, 05:46:48 PM »
Hi Skip:

I am looking for the steel washer and shim (copper washer) that sit between the brass gear immediately and lower spool housing. 

Thanks!

Huckster37

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 609
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Guide
« Reply #3 on: February 10, 2018, 07:55:03 PM »
If you at the schematic and tell me the part names and part numbers I should be able to help you out.
http://www.johnsonreels-online.org/index.php/board,373.0.html

gcdunlap

  • Guest
Re: Guide
« Reply #4 on: February 11, 2018, 03:04:11 PM »
After looking at the drawing, it looks like the 1043-3 (Drag Holder) and the 1041s (Drag Washers - Internal Teflon).

Thanks,
Gene
« Last Edit: February 11, 2018, 03:15:56 PM by gcdunlap »

Huckster37

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 609
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Guide
« Reply #5 on: February 12, 2018, 06:04:00 AM »
I'm no at home right now, so I won't be able to check until this weekend. I know I have the teflon washer, and I think I have the drag holder, I'll let you know this weekend.
Dennis

gcdunlap

  • Guest
Re: Guide
« Reply #6 on: February 12, 2018, 09:55:30 AM »
OK - thanks!

Skip Smith

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 818
  • Country: us
  • Karma: +6/-1
    • View Profile
Re: Guide
« Reply #7 on: February 12, 2018, 02:24:08 PM »
I dorked up....my Guides are 155's.  Can't help.

gcdunlap

  • Guest
Re: Guide
« Reply #8 on: February 13, 2018, 05:00:53 PM »
I have a 155 too... but it's functional! Thanks for looking!

Skip Smith

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 818
  • Country: us
  • Karma: +6/-1
    • View Profile
Re: Guide
« Reply #9 on: February 13, 2018, 08:53:33 PM »
You're welcome, my friend!  Got three 155's...one all black, two red/black.  Lemme know if you need help with your 155's and good luck with your 165!

Skip

Huckster37

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 609
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Guide
« Reply #10 on: February 24, 2018, 08:51:21 AM »
Sorry for the delay DC, had to dig this stuff out and I got side tracked in the process. Here are pics of the parts and an internal drag diagram that I made to help me get it back together again. I have both of these parts new and used. Let me know if this is what you need.
The last picture is an internal drag assembly together.
« Last Edit: February 24, 2018, 11:17:59 AM by Huckster37 »

Skip Smith

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 818
  • Country: us
  • Karma: +6/-1
    • View Profile
Re: Guide
« Reply #11 on: February 25, 2018, 08:37:27 PM »
Great breakdown of the internal drag, Dennis!

gcdunlap

  • Guest
Re: Guide
« Reply #12 on: March 02, 2018, 04:13:27 AM »
Hi:

I will need the 1043-3 (Drag Holder) and the 1041s (Drag Washers - Internal Teflon). My preference would be for new parts, but could make do with used ones in good condition.

Thanks!

Huckster37

  • Administrator
  • Johnson Fans
  • *****
  • Posts: 609
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Guide
« Reply #13 on: March 03, 2018, 06:31:44 PM »
I just need your mailing address to make it happen. I tried to send you an email, do you receive it?

gcdunlap

  • Guest
Re: Guide
« Reply #14 on: March 10, 2018, 04:04:46 AM »
HI:

I just saw your message and replied - thanks!

Gene

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal